Thickness to Evaluate3/8–3/4 in · 9–12 mm typically recommended
Combine EPDM Rubber Granules with PU Binder in one surface layer over a properly prepared base. Confirm final thickness, drainage and the complete system against actual project conditions.
One surface layer, planned for the wet environment
Choose a Single-Layer Structure for Your Pool Surround
Coordinate one EPDM surface layer with the existing base, drainage, water exposure and installation conditions.
Recommended direction
Single-Layer EPDM Surface
EPDM Rubber Granules are combined with PU Binder and installed over a properly prepared, compatible base. The surface thickness can range from 3/8 to 3/4 inch; 9–12 mm is typically recommended for review.
Surface Layer
EPDM Rubber Granules + PU Binder
Thickness Range
3/8–3/4 in
Typical Recommendation
9–12 mm
Before Confirmation
Review base, drainage, moisture and site conditions
Match Pool Surround Materials to Wet-Area Requirements
Select EPDM Rubber Granules and PU Binder according to the surface structure, water exposure, design requirements and installation conditions.
EPDM Rubber Granules
Create colorful, comfortable poolside surfaces with EPDM Rubber Granules matched to the selected surface structure and design.
Use EPDM colors to coordinate the pool surround with architecture, landscaping and leisure environments.
114+
Poolside Color Options
Choose single colors or mixed-color combinations from 114+ standard colors. An approved formula can be recorded as a production and batch reference for single-color or mixed-color planning.
Review a physical sample and keep the approved formula and batch reference for repeat-order planning.
Estimate EPDM Rubber Granules and PU Binder requirements before ordering, then confirm the result against the selected surface structure and project conditions.
Material Quantity Calculator
Use project area and the confirmed structure to prepare an initial EPDM Rubber Granules and PU Binder estimate.
See How FieldsMaster Materials Support Pool Surround Projects
Review published poolside applications and the material information currently available. Each application reference is presented with the source scope available for review.
Published Poolside Application
Published application reference
Application: Poolside / water-park environment.
Material: FM-W Series EPDM Rubber Granules are presented for water-park and poolside use.
Requirement: Wet-area comfort, appearance and material review.
Evidence: FieldsMaster FM-W Series application page and published image.
Published Aquatic Leisure Application
Published application reference
Application: Aquatic leisure surfacing.
Material: Confirm product selection and complete structure during project review.
Requirement: Coordinate a wet-area surface with active leisure use.
Evidence: Image published on the FieldsMaster water-park application page.
Pool Surround Visual Reference
External pool-surround application reference
Application: Swimming pool surround.
Material: Rubaroc system; not presented as a FieldsMaster project.
Requirement: Show surfacing integrated with an outdoor pool environment.
Evidence: Published Rubaroc pool-deck imagery, used for visual context only.
Why FieldsMaster for Swimming Pool Surround Surfacing?
Move from wet-area requirements to a connected EPDM Rubber Granules, PU Binder, color and evidence review.
30 Years
Manufacturing Expertise
Bring established material manufacturing experience into project-specific selection and preparation.
114+ Colors
Poolside Color Options
Coordinate the pool surround with water, architecture and landscaping using repeatable formulas.
EPDM + PU
Connected Material Planning
Review EPDM Rubber Granules and PU Binder together around the selected surface structure.
Evidence
Support Specification Review
Request relevant technical documents and confirm scope before final project specification.
Answers for Better Pool Surround Surfacing Decisions
Practical guidance for reviewing wet-area performance requirements and the evidence applicable to the selected system.
Is EPDM suitable for swimming pool surrounds?
EPDM Rubber Granules with PU Binder can be evaluated for pool surrounds. Suitability must be confirmed against wet-area requirements, base condition, drainage, exposure and the selected system.
Is EPDM surfacing suitable for wet areas?
It can be considered when the complete system, drainage and applicable slip-resistance requirements are reviewed for the project.
How do I choose a pool surround surface?
Start with use, wet-area requirements, water exposure, drainage, comfort, base condition, maintenance and design, then confirm the material system.
What should I consider for slip resistance around a swimming pool?
Confirm the applicable requirement and test method for the location, then review evidence for the selected complete system. Use the test result applicable to the selected complete system.
How should drainage be planned for EPDM pool surrounds?
Review falls, outlets, edges, the existing base and surrounding water routes to limit standing water. Final drainage should be confirmed by the project team.
How does water exposure affect EPDM surfacing?
Water exposure makes drainage, substrate moisture, material compatibility and curing conditions part of system selection and installation planning.
How do I choose PU Binder for a pool surround?
Match PU Binder to the selected EPDM layer, color requirement, exposure and installation conditions, using the applicable technical data.
Can I customize the color of a pool surround?
Yes. Choose from 114+ standard colors and request a recorded factory-premixed formula for an approved single or mixed-color selection.
How do I calculate EPDM and PU Binder quantities?
Use the Material Quantity Calculator with project area and the selected structure, then confirm consumption and allowances before ordering.
What should I check before installing EPDM around a swimming pool?
Check the base, moisture, drainage, weather, material compatibility, mixing plan, curing window and applicable project requirements.
Plan Your Pool Surround With the Right Materials.
Share your pool area, existing base, location, required colors and installation conditions for a project-specific review.
One surface layer, planned for the wet environment
